Every hydraulic system works under pressure, and based on application needs, system pressure needs to be monitored and regulated, and the volume of fluid to be handled or backed up is decided. An Accumulator is the best to do this.
However, a single accumulator may not be practical or possible, always, due to various technical and commercial reasons. This necessitates achieving the objective by using multiple accumulators connected together, which is nothing but an Accumulator station.
The key to getting the right accumulator station for your application is to know your system requirements and specification.
To design the accumulator volume, we need the following technical details
- Minimum working pressure (bar)
- Maximum working pressure (bar)
- Minimum working temperature (deg C)
- Maximum working temperature (deg C)
- Volume of Oil to be delivered (litres)
- Cycle time to deliver this oil (sec)
An Accumulator station is ready to use the system, for operation with all the necessary controls
It can be composed of
- Single bladder accumulator with single nitrogen bottle.
- Multiple bladder accumulators connected on the fluid side by a common piping, ball valve controls.
- Single or multiple piston accumulators with multiple nitrogen bottles.
- Single or multiple piston accumulators mounted on the support frame and related instrumentations.
We customise each accumulator station according to customer specs and requirements, complete with the required type, make, and size of the accumulator and all accessories such as ball valves, safety blocks, pressure gauges, and pressure relief valves, all connected to pipes in carbon steel, and fittings, free from leaks.
Whatever your application needs are, we are here to help you, size and propose you an accumulator station for the same.
