Oil Filters
Filter products offered by us include Pressure line filters, Return line filters, Off-line filters, Air breather filters, Desiccant filters, Spin-On filters, Suction strainers and filter elements for various hydraulic and lubrication systems.
Detailed description regarding offered products is provided below:
Apart from Accumulators, we also offer related Accessories for safe operation, mounting and handling of these Accumulators.
Pressure Line Filters
These filters are used to protect individual valves, in particular sensitive components, such as servo and proportional valves used in the hydraulic circuit from contamination as per ISO 4406, hence it is recommended to install this type of filter immediately before the valve. If systems does not permit flow interruption, you may use Duplex filter.
* In-line mounting – Threaded and flanged
* Manifold – Top and side mounting
* Manifold mounting, to DIN 24340/CETOP R 35 H
* Flow rates up to 2500 l/min
* Filter rating: 3 to 200 µm
* Filter materials : Glass fibre, S.S Metal fibre, Wire mesh.
* Absolute or nominal filtration, depending on the filter material
* Operating temperature : -30 °C to +100 °C
* Available with by-pass, reverse flow, non-return valve
* Compatible with all conventional operating media
Return Line Filters
As the last link in the hydraulic circuit they hold back contamination particles before these get into the tank. For systems which are operated around the clock, the filter housing must be of the change-over type so that the system does not need to be switched off for filter maintenance.
* Operating pressure upto 25 bar
* Flow rates up to 15,000 l/min
* Filter rating: 3 to 200 µm
* Filter materials : Glass fibre, S.S Metal fibre, Wire mesh, Paper and Water-absorbent material
* Absolute or nominal filtration, depending on the filter material
* Operating temperature : -30 °C to +100 °C
* End connections – Threaded and Flanged (DN 300)
* Compatible with all conventional operating media
Off-line Filters
Features:
* Filter fineness possible : 2 µm and above
* Various housings and sizes available to suit varied applications.
* Water Absorbing filter elements possible.
* Bypass Lube-Oil Filters
* Greater machine availability
* Longer oil change intervals
* High service-friendliness
* High contamination retention capacity of the elements
Air Breather Filters
We offer a huge gamut of air breather such as metal, plastic air breather & plastic breather plugs for hydraulic and lubrication reservoir.
* Filter rating : 3 µm to 40 µm
* Filter materials : Glass fibre, Paper material
* Absolute or nominal filtration, depending on the filter material
* Operating temperature : -30 °C to +100 °C
* Compatible with all conventional operating media
* Fastening by means of flange, weld or screw connection
* Optional — lockable / with anti-splash protection
Desiccant Filter
The desiccant breather replaces the standard dust cap or breather cap on equipment, offering better filtration to protect against even the smallest particulates that destroy the effectiveness of your machinery, and cause downtime and costly repairs.
Desiccant Breathers are the light-weight breather filters which combines filtration and absorption. While inhaling air, these filters dry the air as it passes through the drying agent. As moisture is absorbed, the drying agent will gradually change from orange to green or blue to pink based on type of drying agent used. When it is green or pink, replace the entire unit.
We offer different sizes to suit different application
Spin-On Filters
In-line Spin-On filters can be used for the following purposes:
* On the return circuit, for mounting on the line or on the tank cover
* In-line for low and medium pressures
* In-line with two parallel cartridges on the same axis or mounted side by side.
* With single cartridge flange for installation to the tank cover
* All versions may be equipped with visual and/or electrical blockage indicators.
Suction Filters
* Flow rates up to 1000 l/min
* Operating temperature range: -20 °C … +100 °C
* Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP)
* Numerous connection variants in BSP thread (ISO 228) or NPT thread (ANSI B1.20.1)
* Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce risks of high-pressure
drops, possible.
Filter Elements
These filter elements are available with various filter materials, different construction types and micron ratings to help protect critical system components.
Product feature range :
* Filter material available – Inorganic glass fibre, Paper, Stainless Steel fibre, Wiremesh
* Micron ratings – 1µm to 20 µm (absolute filtration) 25 µm to 300 µm nominal.
* Differential pressure depending on filter media and application is 10 bar, 25 bar or 210 bar.
Clogging Indicators
This is achieved by using filter housings equipped with clogging indicators. These devices trip when the clogging of the filter element causes an increase in pressure drop across the filter element. The indicator is set to alarm before the element becomes fully clogged.
These indicators are designed for use on a wide range filters and suitable for competitive interchange. Ideal for giving accurate visual, electronic or electrical feedback of filter element condition, in order to facilitate effective maintenance and ensuring hydraulic systems, marine/mobile or industrial are protected from particulate contamination.
* Electrical : With electrical output signal
* Electronic : Pressure switch with electronic output signal with stages of clogging
* Combined Visual + Electrical type
* Wide range of vaccum pressure range for suction applications
* Wide range of normal pressure range for 1.5 bar to 8 bar depending on application requirements
Send Us A Message
Our Team can assist you upon :
Sourcing and Supply
Supply and Servicing
Heat Exchangers
Oil filtration units
Hydraulic Accessories
Non-Sparking Hand Tools
Import substitution
Application Engineering & Supply Solutions:
- Filters
- Accumulators
- Coolers
- Valves
- Hydraulic Pumps & Power Units
Industries Served
Mobile Construction Machine
Mobile
Mobile Construction Machine
Mobile Construction Machine
Mobile Construction Machine
Mobile Construction Machine
Mobile Construction Machine
Mobile
Mobile Construction Machine
Mobile Construction Machine
Mobile Construction Machine
Mobile Construction Machine
We have an established clientele across various industries with an excellent track record for customer satisfaction
Some of the clients whome we have serviced their requirements include :
Contact Us
Please feel free to stay in touch with us for any hydraulic related requirements / queries.
Murtaza
Khandwala
Call us
+91-9653268394
+91-9820442852
techknowengg@gmail.com
Copyright © 2020 Tech Know Engg All Right Reserved